We changed the hardware holding the magnetic rotor in place to the advance mechanism. Above from left to right: a 6mm hex head bolt (30mm long). We ground this down to the required length then ground off 1/3 of the head to get the cover to fit nicely (without a spacer). The small spacer (top middle) fit over the bolt and was 0.245” long. The spacer allows the bolt to be tightened without having the washer interfere with the advance motion of rotor. The washer was original….
Dyna S ignition for GL1000 (red markings indicate pickup triggers). We
started with the instructions from augustiron. But had to make some
modifications that are documented below….
If you want to download this book PDF MANUAL INSTALLING DYNA S IGNITION FOR GL1000 ON CB450K4.
Comments
Comment
Check out what others are saying about this post...[...] PDF MANUAL INSTALLING DYNA S IGNITION FOR GL1000 ON CB450K4.pdf …Starting without an ignition key KESSY now also available for …Why Doesn't The Ignition Rotor Spin/rotate On My 94 Honda Accord …Metal Meat Machine: Agent Orange | Primary Ignition [...]