If you want a simple guide Installation Manual Ford Focus Ipod you can read this book. Becouse this book will help you to connect ipod gadget to your Ford car. Purpose for the owner and mechanic this book will tell us easy step by step. This section pertains to Ford Focus car which do not have a factory installed satellite receiver. To install the iPod Adapter you will need to access the back of the OEM radio in your vehicle. Specific instructions for removing the trim in your vehicle are included in this guide. If you are not confident that you can safely remove your interior trim to perform the installation, contact your dealer or a competent mechanic for assistance.
You should be installing you Brand motion iPod Adapter into a Ford Focus with an OEM radio that is similar to this picture. Radio Removal Instructions: 1) Remove panel by snapping of trim cover. 5) Disconnect A/C controls 2) Remove four 7mm screws holding radio in place. 3) Remove radio from cavity 4) Disconnect radio connectors from radio and set radio aside. 6) Connect Brand motion Vehicle Harness to vehicle using both the 16 pin and 24 pin connector (note if your vehicle does not have a 16 pin harness the unit will work as long as the radio has the female 16 pin connector on the back of the unit). The part number of the radio verifies that your particular vehicle has the 16 pin female connector on the back of the radio.
Get this pdf automotive manual from original site here www.brandmotion.com, by follow this directly dwnload link information come from google search engine at this via Installation Manual Ford Focus Ipod.pdf. We hope this simple manual book can useful for you. Read carefully!